JAソーラーのタイプ1モジュールがUL1703のクラスA燃焼試験に合格

JA Solar Holdings Co., Ltd.

JAソーラーのタイプ1モジュールがUL1703のクラスA燃焼試験に合格

AsiaNet 61095 (0884)

【上海2015年7月6日PRN=共同通信JBN】高性能太陽光発電製品の世界最大手メーカーの1つであるJAソーラー・ホールディングス(JA Solar Holdings Co., Ltd.、Nasdaq:JASO)(以下JAソーラー)は6日、同社の標準モジュールが、タイプ1モジュール向けUL1703規格に従うクラスA燃焼試験に合格したと発表した。試験の中で、JAソーラーのタイプ1モジュールに使用する計6セットのBOM(部品材料表)がインターテック(Intertek)社が実施したULクラス1燃焼試験に合格した。これにより、JAソーラー中国でこの試験を初めてクリアした太陽光発電(PV)モジュール大量生産企業になった。

Logo - http://photos.prnasia.com/prnh/20150522/0861504483LOGO

この数年、太陽光発電の設置は前例のないペースで世界的に急速に成長しており、太陽光電気のエンドユーザーからのより良い質とより高い信頼性を持ったPV製品の需要増とともに、さまざまなレベルの立法府と政府からのPV設置のためのより厳格な安全性、環境、災害規制に対応するため、PVモジュールに対する信頼性認証の標準規格と基準は常に更新され、拡大されてきた。

UL-1703によって設定されたタイプ1PVモジュールに対するクラスA燃焼試験は、ガスフレームから10分以上の直接トーチ燃焼に耐えられるかどうかのモジュール試験(風速5.4±0.2m/sでフレーム温度は760±28oCであり、許容フレーム拡散距離は1.82メートル以下)を必要とする。クラスA試験の基準は、これまで広く受け入れられてきたクラスC基準のそれよりはるかに厳しい。クラスC基準は試験されるPVモジュールが直接燃焼で4分間以上(風速5.4±0.2m/sでフレーム温度704±28oC、許容フレーム拡散距離3.9メートル以下)となっていた。インターテックが実施したクラスA試験の最中、JAソーラーのタイプ1モジュールは自己可燃状態にならずに地獄の光景さながらの熱に耐えたばかりでなく、フレームトーチはPVパネルを通過して延焼させることもなかった。

UL1703クラスA試験に合格したJAソーラーのタイプ1モジュールは1度ならず、顧客に高性能、高品質、信頼できるPV製品を供給し、技術革新と性能向上を通じてクリーンエネルギーの需要増に応えるというJAソーラーの長年のコミットメントを示すものである。

ソース:JA Solar Holdings Co., Ltd.

JA Solar Achieves New Class A Fire Rating Test in Accordance With UL1703 for Type-1 Modules

PR61095

SHANGHAI, July 6, 2015 /PRN=KYODO JBN/--

   JA Solar Holdings Co., Ltd. (Nasdaq: JASO) (JA Solar), one of the world's

largest manufacturers of high-performance solar power products, today announced

its standard modules successfully passed the Class A fire test in accordance

with UL1703 standard for Type 1 modules. During the test, all six sets of BOM

used for JA Solar's type-1 modules passed the UL Class A fire test conducted by

Intertek, making JA Solar the first company mass producing PV modules in China

to pass the test.

   Logo - http://photos.prnasia.com/prnh/20150522/0861504483LOGO

   In recent years, as the installation of solar electricity generation has

been rapidly grown worldwide at a unprecedented pace, the standard and criteria

for the reliability certification of PV modules have been constantly updated

and expanded in order to meet the increasing demand for PV products with better

quality and higher reliability from the end user of solar electricity, as well

as the more stringent safety, environment, and hazard regulations for PV

installations by legislatures and governments at various levels.

   The Class A fire test for Type 1 PV modules set forth by UL-1703 requires

the tested module to endure direct torch burning for more than 10 minutes from

gas flame (the temperature of flame is 760±28oC, with wind speed at 5.4±0.2m/s,

allowed flame spreading distance is under 1.82 meters). The criteria of this

Class A test is far stricter than that of the previously commonly accepted

Class C standard, which only requires the tested PV module to take 4 minutes of

direct burning (with the flame temperature at 704±28oC, the wind speed at

5.4±0.2m/s and allowed flame spreading distance at under 3.9 meters). It turned

out that, during the Class A test conducted at Intertek, the JA Solar's Type-1

modules subjected to the test not only withstood the inferno-like heat without

becoming self-flammable; the flame torch was not even able to burn through the

PV panel.

   The fact that JA Solar's Type-1 modules passed the UL1703 Class A test once

again demonstrates the long-term commitment of JA Solar to provide our

customers with high-performance, high quality and reliable PV products, and to

meet the ever increasing demand for clean energy through technological

innovation and performance improvement.

   SOURCE: JA Solar Holdings Co., Ltd.

本プレスリリースは発表元が入力した原稿をそのまま掲載しております。また、プレスリリースへのお問い合わせは発表元に直接お願いいたします。

このプレスリリースには、報道機関向けの情報があります。

プレス会員登録を行うと、広報担当者の連絡先や、イベント・記者会見の情報など、報道機関だけに公開する情報が閲覧できるようになります。

プレスリリース受信に関するご案内

SNSでも最新のプレスリリース情報をいち早く配信中