◎JAソーラーが変換効率20%超のP型太陽電池PERCIUMの量産開始発表

JAソーラー・ホールディングス

◎JAソーラーが変換効率20%超のP型太陽電池PERCIUMの量産開始発表

AsiaNet 57134

共同JBN 0689 (2014.6.23)

【上海2014年6月23日PRN=共同JBN】高性能太陽電池製品の世界最大手メーカーである中国のJAソーラー・ホールディングス(JA Solar Holdings Co., Ltd.、Nasdaq:JASO)20日、太陽電池PERCIUMの量産開始を発表した。太陽電池PERCIUMは20%の変換効率を超える業界初のP型(半導体)太陽電池であり、初めて20.4%の平均変換効率に達した。6x10(60セル)のPERCIUM太陽電池モジュールは平均定格出力285Wに達し、1週間後には量産に入る予定。量産準備は新製品が今年初めに発表されて以来わずか3カ月後に行われ、モジュールは今年末までには定格出力が290Wに達する見込みである。

高い変換率と高度な信頼性は、次の開発段階として太陽光発電業界が極めて重視する2つの側面である。そのような変換率と信頼性は、JAソーラー製品を非常に有名にしていることでもある。JAソーラーは今年初め、日本、英国、イスラエル、中国、ドイツの市場でPERCIUM太陽電池モジュールの発売を発表した。JAソーラーはそれ以来、多くの問い合わせと注文書を受け取っている。

JAソーラーは顧客の高まる需要に応えるため、短期間で量産の準備を完了し、PERCIUM太陽電池の生産能力を拡大し続けている。同社は現在1つのPERCIUM太陽電池生産ラインを持ち、10月には4ラインに増える。2015年には生産ラインが8つになる見込みである。PERCIUM太陽電池の生産能力は今年末までに170MW、来年には350MWになる見通しである。

JAソーラーのヨン・リュー最高執行責任者(COO)は「高い変換効率は、ワット当たりのシステムコストを低減することができるが、これは低いBOS(基本オペレーティングシステム)コスト、輸送コスト、設置コスト、用地費になることを意味する。PERCIUM太陽電池は、不動態処理された裏面およびローカルBSFテクノロジーを使って、モジュールの優れた微光性能を保証する。システム側の高コスト性能は、キロワット時(KWH)当たりの出力コストを削減する助けになる」と語った。

詳しい情報は以下に接触できる。

Erica Hu

+86-21-6095-5888/6095-5999

sales@jasolar.com

market@jasolar.com

ソース:JA Solar Holdings Co., Ltd.

JA Solar Starts Mass Production of PERCIUM Solar Cell, Conversion Efficiency Reaches 20.4%

PR57134

SHANGHAI, June 23, 2014 /PRN=KYODO JBN/ --

    JA Solar Holdings Co., Ltd. (Nasdaq: JASO) ("JA Solar" or the "Company"),

one of the world's largest manufacturers of high-performance solar power

products, launched mass production of its PERCIUM solar cell on June 20th. The

PERCIUM solar cell, the first P-TYPE solar cell in industry that surpasses a

conversion efficiency of 20%, has reached an average conversion efficiency of

20.4%. The 6x10 PERCIUM cells module, which has reached an average power rating

of 285W, is expected to be put into mass production one week later. The

preparation for mass production has taken only three months since the new

product release early this year and the module is expected to reach an average

power rating of 290W by the end of the year.

    High conversion efficiency and high reliability are two aspects the solar

industry highly values as the next step of development. It's also what makes JA

Solar products so outstanding. Early this year, JA Solar launched the 6x10

PERCIUM cells module in Japanese, British, Israeli, Chinese and German markets

and has received positive responses, especially from European and Japanese

markets. Since then JA Solar has received plenty of enquiries and order forms.

    To meet the increasing demands of customers, JA Solar has completed

preparations for mass production within a short time and will continue to

expand the capacity of PERCIUM solar cells. Currently, the company has one

PERCIUM solar cell production line and will have four this October. It expects

to have eight in 2015. The capacity of PERCIUM solar cells is expected to reach

170MW by the end of this year and 350MW next year.

    "High conversion efficiency can bring about low system cost per Watt, which

means low BOS, transportation, installation and land cost," said Mr. Yong Liu,

chief operation officer of JA Solar. "The PERCIUM solar cell uses Passivated

backside and local BSF technology to ensure excellent low-light performance of

PERCIUM cells module. High cost performance on the system side can help to

reduce the cost of power per KWH."

    For further information, please contact:

    Erica Hu

    +86-21-6095-5888/6095-5999

    sales@jasolar.com

    market@jasolar.com

    SOURCE: JA Solar Holdings Co., Ltd.

本プレスリリースは発表元が入力した原稿をそのまま掲載しております。また、プレスリリースへのお問い合わせは発表元に直接お願いいたします。

このプレスリリースには、報道機関向けの情報があります。

プレス会員登録を行うと、広報担当者の連絡先や、イベント・記者会見の情報など、報道機関だけに公開する情報が閲覧できるようになります。

プレスリリース受信に関するご案内

SNSでも最新のプレスリリース情報をいち早く配信中